 |
ACCOMMODATES - This Stable Complex accommodates 1 Horse only. Extra stable units can be purchased to accommodate further horses; please see 'Add-on Modular Units' section |
 |
EXTERNAL SIZE 9m (29'6") wide x 3.6m (11'9") deep (approx). |
 |
INTERNAL SIZE for STABLE - 3.44m (11'3") wide x 3.44m (11'3") deep (approx), for TACK ROOM - 1.73m (5'8") wide x 3.46m (11'4") deep (approx), for HAY STORE - 3.53m (11'6") wide x 3.53m (11'6") deep (approx) |
 |
INTERNAL SQUARE METRES for STABLE - 11.83m² / TACK ROOM - 5.98m² / HAY STORE - 12.46m² (approx) |
 |
CLADDING - 16mm thick finish x 120mm shiplap, which is less likely to curl than 150mm timber. (ex 19mm x 125mm) Pressure Treated Timber. |
 |
FRAMING - ex 75mm x 40mm Pressure Treated Timber. Double Framing for Extra Stability, giving you more timber than a 100mm x 50mm section. |
 |
KICK BOARD - Walls half lined to 1250mm high with 18mm OSB Boarding. |
 |
ROOF - Corrugated Bitumastic material. |
 |
BASE PLINTH - ex 70mm x 70mm Pressure Treated Timber with water resistant treatment to prevent water ingress. Sealed underneath and bolted down to the concrete, No course of bricks need laying. |
 |
ROOF PURLINS 140mm x 45mm finished (ex 150mm x 50mm), the LARGEST available on Stables (to our knowledge). Spaced at 600mm apart, held in place with passivated steel angle brackets. |
 |
INTERNAL EAVES - 2450mm (8'1") (approx) High, the lowest point inside, giving plenty of interior space. |
 |
RIDGE HEIGHT - 3350mm (11'1") (approx) High. |
 |
CANOPY 1.2m (3'10") (approx.)deep canopy to create an area of shade and shelter outside the front of the stable. |
 |
HEAVY DUTY STABLE DOOR - Overall dimension 1200mm x 2290mm, with a Walkthrough of 1180mm x 2290mm (approx). Shoot Bolts and Kick over Latch. The door is hung on its own 90mm x 45mm Frame, not on the stable framing, with Heavy Duty 24" Galvanised Hinges. Fully Lined with OSB Boarding, 400mm deep Anti-chew strip on top of Lower Door Sash. Doors can be hung either left or right. |
 |
2 CABIN HOOKS - 4” Cabin Hooks supplied per stable door. |
 |
HEAVY DUTY DOOR to Tack Room - 1000mm x 2000mm, GalvanisedShoot Bolt and Heavy Duty 18" Galvanised Hinges. |
 |
VIEWING WINDOW - One 400mm x 500mm Perspex Glazed with internal Galvanised bars per Stable. Each window has a Sliding Pressure Treated Shutter over Window. |
 |
WINDOW in Tack Room - Fixed Window with Security Bars above door to let in daylight. |
 |
LOUVRE WINDOWS - 5 Fixed Louvre Windows for ventilation, underneath the canopy to prevent rain ingress. (2 in Stable, 1 in Tack Room, 2 in Hay Store) |
 |
BOLTS - 10mm plated steel bolts, 1 per every 4' length of wall. |
 |
BLACK GUTTERING to front elevation leading into a 100 ltr Water Butt for cleaning out the stable. Optional Guttering is available for the rear of the Stable. |
 |
ROOFING MATERIAL (Optional Extra) Please choose from Bitumen Shingles or Roofing Felt from the Optional Extras below. |
 |
Please note: Sizes quoted are nominal sizes. |
 |
Important must read! |