All our garden buildings have been designed on the basis that any competent DIY customer should have no problem installing a product themselves in a short amount of time. You do not have to be an expert at DIY to build a Dunster House garden building, as we do provide you with comprehensive pictorial instructions. We totally understand that DIY is not for everyone therefore, you may want to consider getting in touch with a local carpenter or handyman to install it for you. But before you do, check out our construction video and decide for yourself!

Unlike our competitors, we only use high-quality spruce timber on our wooden products rather than cheap pine or mixed timber. Why do we use slow grown spruce rather than the much cheaper knotty pine alternatives?

Spruce is considered more stable as it expands and contracts less than pine. This stability means that the spruce timbers in our garden buildings minimise splits from appearing as the timber changes along with the weather.  We responsibly source all our timber, where it grows slowly in the cold northern regions. We all know the old adage of counting the rings to see how old a tree is, well our timber grows slower and takes longer to get to size meaning it has more rings in it. This means it has a tighter grain, and each ring helps prevent cracks and shakes from appearing in the densely packed timber.

Our wooden garden buildings and climbing frames really are built to last therefore we use only the highest quality, slow-grown spruce.  Spruce is much more resilient to warps and splits compared to its cheaper alternative pine. Being a whitewood, it doesn’t discolour anywhere near as much as pine so it is also much more aesthetically pleasing for a garden structure. Considered more stable, less knotty and resinous than pine, spruce will also produce a lot less sap. It is also less dense meaning it is not as susceptible to mould and rot.

All of the timber in this shed is pressure treated, responsibly sourced (except MR P5  sheets) and is guaranteed against rot and insect infestation for 10 years. Protecting your timber thoroughly, you won’t need to re-treat for at least ten years or worry about little critters causing havoc. We recommend that you treat external timber with a good quality water repellent.
All our Pressure Treated timber is for User Class 3

There is nothing more annoying than being in the middle of building something and finding that you don’t have the right fixings to continue. We include all of the screws, nails and fixings that you will need to put your garden building together – not many of our competitors are that thoughtful. This eliminates the need to worry about the type of screws or the length of nails you might need to get started – it’ll all be with your delivery.

We use 4mm thick toughened glass, not Perspex or Styrene which can scratch easily and cloud up over time. This is also thicker and less likely to break when hit with the neighbour’s pesky football compared to the industry standard of 3mm horticultural glass.

We know how important your time is, so we have designed our sheds to be as straightforward as possible to construct. The walls are made using pre-fabricated panels of pressure-treated shiplap cladding, attached to a framework of thick 35mm x 35mm timbers. The roof and floor are supplied in 10mm thick MR P5 boards, allowing you to fit them quickly.

The construction of this Shed helps you make sure that your valuable tools or other treasured equipment is safe and sound! The sturdy hasp and clasp that holds your padlock are designed so that in the closed position, its fixing screws are covered by the metal clasp, making it difficult to remove from the timber. Similarly, the hinges are bolted in position and difficult to remove when the door is in the closed position.

We supply Superfelt. NOT cheap low-grade felt.

Give your Garden Building a durable roof covering with our Superfelt. This is a highly durable felt, made of thick material using an advanced polyester formula to make it resistant to tearing in strong winds. Superfelt will offer your Garden Building added protection from the varying British weather and is supplied in a green/grey mineral finish.

Cheap low-grade felt

Superfelt

Water resistant and easy to install, MR P5 is included for the roof and floor of the Shed so there are no hidden costs when ordering. Some competitors may charge extra for flooring!

Remarkably durable and water resistant, the MR P5 flooring will help keep your equipment free from dampness and will not change its shape when in contact with low-level moisture. The roof and floor boards will provide a sturdy surface and one that requires no treatment. 
You may find that some competitors offer cheaper OSB. Be aware that OSB is less dense and therefore not as strong and it is less resistant to moisture.

All of our garden buildings have pressure-treated floor bearers as standard. This treatment prevents the timber bearers from rotting for up to 10 years and causing your garden building to sink. Pressure treatment forces the wood preservative into the timber rather than simply dip treating (essentially just covering the exterior) like many companies still do. Who wants to have to annually deconstruct and re-treat the bearers each year!

Due to this costly but effective process, we can offer our customers a genuine 10-year guarantee against rot and insect infestation on the bearers.  We do however recommend applying a good quality water repellent to the timber to prolong the longevity of the timber. Shockingly many of our competitors still offer untreated bearers to keep their costs down, so beware!

All our Pressure Treated timber is for User Class 3