All of the timber in this garden building has been responsibly sourced and pressure-treated to ensure it lasts. Pressure treatment forces the wood preservative into the timber rather than simply dip treating (essentially just covering the exterior) like many companies still do.

Unlike some competition, we can offer a genuine 10-year guarantee against wood-eating fungal and insect infestation on pressure-treated timber.

All our Pressure Treated timber is for Use Class 3.

Unlike our competitors, we only use high-quality spruce timber on our wooden products rather than cheap pine or mixed timber. Why do we use slow grown spruce rather than the much cheaper knotty pine alternatives?

Spruce is considered more stable as it expands and contracts less than pine. This stability means that the spruce timbers in our garden buildings minimise splits from appearing as the timber changes along with the weather.  We responsibly source all our timber, where it grows slowly in the cold northern regions. We all know the old adage of counting the rings to see how old a tree is, well our timber grows slower and takes longer to get to size meaning it has more rings in it. This means it has a tighter grain, and each ring helps prevent cracks and shakes from appearing in the densely packed timber.

Our wooden garden buildings and climbing frames really are built to last therefore we use only the highest quality, slow-grown spruce.  Spruce is much more resilient to warps and splits compared to its cheaper alternative pine. Being a whitewood, it doesn’t discolour anywhere near as much as pine so it is also much more aesthetically pleasing for a garden structure. Considered more stable, less knotty and resinous than pine, spruce will also produce a lot less sap. It is also less dense meaning it is not as susceptible to mould and rot.

We only use full lengths of timber in our garden products – we don’t glue separate offcut pieces together with finger joints. Not only are they stronger, but they look much better too.

Other companies are happy to provide you with rough offcuts, mixed timber and finger jointed timber, creating an odd-looking weak garden building with an off-putting appearance.

All our wooden carports are supplied with 19mm tongue & groove roof boards as standard. We don’t see the need to charge you for something you expect to be included when you buy a heavy-duty carport.

Our roof boards are made using the same high-quality, planed spruce timber that we use for the walls of your carport. We feel that using this type of roofing gives you a more appealing, hard wearing surface especially when you compare against inferior materials such as OSB board.

There is nothing more annoying than being in the middle of building something and finding that you don’t have the right fixings to continue. We include all of the screws, nails and fixings that you will need to put your garden building together – not many of our competitors are that thoughtful. This eliminates the need to worry about the type of screws or the length of nails you might need to get started – it’ll all be with your delivery.

All of our timber Pergolas, Gazebos, Carports and Porches are fully pressure treated as standard. We take the pre-cut lengths of timber and place them in a large pressure treatment tank, where the timbers are impregnated with a non-toxic preservative. We add a colourant during this process, giving the timber a rich brown colour. By pressure treating the timber, we can offer a genuine 10-year guarantee against rot and insect infestation. We only suggest that you apply a good quality water repellent to prolong the longevity of the timber.

All our Pressure Treated timber is for Use Class 3. It involves the application of preservatives using a vacuum.

 

Attached to the chunky posts is a 70mm framework with full lengths of 15mm shiplap cladding. The cladding interlocks creating a strong watertight bond along with a channel that allows rain to run off the carport to the ground quickly. Not only is this cladding design practical but also creates an attractive, professional appearance.

Our thick tongue and groove roof boards are made from 19mm pressure treated slow-grown spruce. This heavy-duty material is perfect for withstanding anything the British weather can throw at it. Supported by full lengths of heavy-duty purlins, which come in a whopping 140mm x 45mm. These oversized purlins will prevent the roof from sagging.

We use chunky 120mm x 120mm posts which not only look pleasing but they also support the heavy-duty roof purlins, guaranteeing a strong robust structure which is built to last.

There’s no need to ‘duck’ on the way in through our quality wooden gazebos. With a tall walkthrough height of 6′ 11″ (2.12m) you’re free to move in and out of your gazebo concussion free. Just what you need when hosting a garden party of taking a dip in your hot tub.

When we say chunky, we mean chunky! Our 120mm by 120mm chunky posts are made using high-quality spruce which has been pressure treated, before going through a laminating process which bonds the timber together. By laminating the timber, we can create a strong post which is less likely to shrink, swell and twist.

We also router grooves into the posts to not only give a distinctive look and mask the joints but to also further reduce the likelihood of the timber twisting. Most of our competition provide you with what they believe to be large posts, commonly 115mm thick. But when it comes to chunky gazebos, we think bigger is better!