All our garden buildings have been designed on the basis that any competent DIY customer should have no problem installing a product themselves in a short amount of time. You do not have to be an expert at DIY to build a Dunster House garden building, as we do provide you with comprehensive pictorial instructions. We totally understand that DIY is not for everyone therefore, you may want to consider getting in touch with a local carpenter or handyman to install it for you. But before you do, check out our construction video and decide for yourself!

There is nothing more annoying than being in the middle of building something and finding that you don’t have the right fixings to continue. We include all of the screws, nails and fixings that you will need to put your garden building together – not many of our competitors are that thoughtful. This eliminates the need to worry about the type of screws or the length of nails you might need to get started – it’ll all be with your delivery.

All of the timber in this garden building has been responsibly sourced and pressure-treated to ensure it lasts. Pressure treatment forces the wood preservative into the timber rather than simply dip treating (essentially just covering the exterior) like many companies still do.

Unlike some competition, we can offer a genuine 10-year guarantee against wood-eating fungal and insect infestation on pressure-treated timber.

All our Pressure Treated timber is for Use Class 3.

Unlike our competitors, we only use high-quality spruce timber on our wooden products rather than cheap pine or mixed timber. Why do we use slow grown spruce rather than the much cheaper knotty pine alternatives?

Spruce is considered more stable as it expands and contracts less than pine. This stability means that the spruce timbers in our garden buildings minimise splits from appearing as the timber changes along with the weather.  We responsibly source all our timber, where it grows slowly in the cold northern regions. We all know the old adage of counting the rings to see how old a tree is, well our timber grows slower and takes longer to get to size meaning it has more rings in it. This means it has a tighter grain, and each ring helps prevent cracks and shakes from appearing in the densely packed timber.

Our wooden garden buildings and climbing frames really are built to last therefore we use only the highest quality, slow-grown spruce.  Spruce is much more resilient to warps and splits compared to its cheaper alternative pine. Being a whitewood, it doesn’t discolour anywhere near as much as pine so it is also much more aesthetically pleasing for a garden structure. Considered more stable, less knotty and resinous than pine, spruce will also produce a lot less sap. It is also less dense meaning it is not as susceptible to mould and rot.

When we say chunky, we mean chunky! Our 120mm by 120mm chunky posts are made using high-quality spruce which has been pressure treated, before going through a laminating process which bonds the timber together. By laminating the timber, we can create a strong post which is less likely to shrink, swell and twist.

We also router grooves into the posts to not only give a distinctive look and mask the joints but to also further reduce the likelihood of the timber twisting. Most of our competition provide you with what they believe to be large posts, commonly 115mm thick. But when it comes to chunky gazebos, we think bigger is better!

All of our timber Pergolas, Gazebos, Carports and Porches are fully pressure treated as standard. We take the pre-cut lengths of timber and place them in a large pressure treatment tank, where the timbers are impregnated with a non-toxic preservative. We add a colourant during this process, giving the timber a rich brown colour. By pressure treating the timber, we can offer a genuine 10-year guarantee against rot and insect infestation. We only suggest that you apply a good quality water repellent to prolong the longevity of the timber.

All our Pressure Treated timber is for Use Class 3. It involves the application of preservatives using a vacuum.

 

The thickness of the roof beams on our Pergolas show how the quality of our products is superior in that we are never sparing with the amount of timber we are willing to use. We do not compromise on quality when it comes to ensuring that our timber products will last and will stand the test of time and weather wear. Added to the increased durability of the thick beams, they also look impressive and will make your pergola stand out in your garden, adding to the magnificence of your new garden centrepiece.

Customise your garden structure by adding timber panels. The addition of wall panels will provide a useful and attractive way to hide certain areas of your garden. You can combine the half height panels with full height panels on the other sides of your structure, or even choose half glazed panels.